Bias OTR

TIANLI Tires

Tire Classification

Radial OTR

Bias OTR

Agricultural Tires

Forestry Tires

Port Tires

Sand Tires

Services and Support
About TIANLI
Contact Us

CN EN

Hot search:

Tire Filter

Bias OTR

Radial OTR

Bias OTR

Agricultural Tires

Forestry Tires

Port Tires

Sand Tires
Select pattern
Select size
Select
Reset

(62)

SS(L-6S)

SOOPER SCOOPER L-6S

Tire with extra deep tread suitable for severe garbage disposal application.

Longer tire life than regular ones with good resistance to penetration and cuts.
SS1 L-5S

SOOPER SCOOPER-1 L-5S

Specially designed tire with extra deep tread for underground mining loaders.

Compared with L-4S underground mining tire, the tread is much deeper and more superior in resistance to cut, wear and puncture and offer a longer tire life.

But the heat-resistance is not good as L-4S.

More suited for short haul and low speed operations.
SS(L-5S)

SOOPER SCOOPER L-5S

Specially designed tire with extra deep tread for underground mining loaders.

Compared with L-4S underground mining tire, the tread is much deeper and more superior in resistance to cut, wear and puncture and offer a longer tire life.

But the heat-resistance is not good as L-4S.

More suited for short haul and low speed operations.
SS1 L-4S

SOOPER SCOOPER-1 L-4S

A superior underground mining tire is used when maximum wide and extra-deep tread is imperative.

This strong nylon construction tire with special tough wearing tread rubber provides increased resistance to cut and wear and an extended tire life in the most severe underground mining conditions.

Suited for low speed and short haul operations.
SS(L-4S)

SOOPER SCOOPER L-4S

A superior underground mining tire is used when maximum wide and extra-deep tread is imperative.

This strong nylon construction tire with special tough wearing tread rubber provides increased resistance to cut and wear and an extended tire life in the most severe underground mining conditions.

Suited for low speed and short haul operations.
MS-3

MINE SLICK

Designed for underground mining in severe service conditions.

Its super tough tread compounds and strong nylon construction provide extended tire life.

Its slick design offers excellent resistance to cut and wear in underground operations. The MS-3 will deliver performance unparalleled by other standard tires.
DWL L-6

DOUBLE WIDTH LUG L-6

The Double Width Lug, or DWL as it is commonly referred to, offers one the heaviest and deepest tread in bias-ply forklift tires in the world.

Because of this, the Double Width Lug has been shown to last many times longer on fork lifts and bomb carts than the competition.
SXMH L-5

SUPER EXTRA MINE HAULAGE L-5

Specially designed deep tread of half-slick and heavy lugs combined with special compound for severe cut resistance provide excellent resistance to tear, puncture, cut and abrasion. But the traction and heat resistance are not as good as DNRZ Ⅲ.

More suited for the services where non-big traction required and in quite low speed working conditions, like: power construction with lots of rocks, above or underground mines, quarry, waste and slags and garbage disposal field.

Much longer tire life than regular E-3/L-3 tires.
CM5-HT

CONSTRUCTION MINING HALF TRACK L-5

The CM5 half track tire gives you the best of both worlds, featuring the large void for traction, the wear potential of a slick tread, special compounds and heavy casing.

This tire is an ideal performer both under and above ground.

For extended tire life under severe conditions, the CM-5 half track tire will do the job.

Email:tianli@zc-rubber.com

Phone:+86-22-23022731

Subscribe to us

Follow us

Tianlitires

Copyright © 2022 ZHONGCE RUBBER (TIANJIN) CO., LTD. All Rights Reserved. 津ICP备2022009153号-1

Privacy Policy/ Sitemap